Brite Basic
Carbon Steel Wire
Spring Works Utah specializes in the custom manufacture of wire springs, flat springs, and wire products using Brite Basic CA260 Carbon Steel Wire material. Our extensive inventory and design experience makes us a resource for customer requests as well as a preferred supplier to spring manufacturers worldwide. We know choosing the right material can be challenging and many times the most important aspect of your design. We will assist you in picking the best material for your specific application, all at the right price. Allow us to be your custom manufacturer utilizing Brite Basic CA260 material.
Choosing the Right Springs Manufacturer Matters!
Put Us To Work For You!
*Mobile: To view complete table - scroll horizontally
Technical Specifications of Carbon Steel Wire Brite Basic CA260 |
||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Specifications | Key Features | Chemical Composition | ||||||||||||||||||||||||
| AMS 5688 ASTM A313 ASTM A580 BS 970 BS 2056 |
Good mechanical properties and corrosion resistance. |
|
||||||||||||||||||||||||
*Mobile: To view complete table - scroll horizontally
Technical Specifications of Carbon Steel Wire Brite Basic CA260 |
||
| Maximum Temperature | 500°F | 260°C |
| Melting Point | 2590°F | 1420°C |
| Minimum Size | 0.005 in | 0.130 mm |
| Maximum Size | 0.375 in | 9.500 mm |
| Modulus of Elasticity | 27195 ksi | 187.5 kN/mm² |
| Modulus of Rigidity | 10196 ksi | 70.3 kN/mm² |
| Density | 0.286 lb/in3 | 7.920 g/cm3 |
| Relative Strength | Medium | |
| Fatigue Applications | Good | |
| Rockwell Hardness | C35-45 | |
| Conductivity | 2 | |
| Typical Surface | B | |
*Mobile: To view complete table - scroll horizontally
Technical Specifications of Carbon Steel Wire Brite Basic CA260 |
|||
| E Mpa | Young's Modulus | These factors can vary with cold work, heat treating and operational stress. | |
| E psi | |||
| G Mpa | Modulus of Rigidity | ||
| G psi | |||
| Conductivity | % IACS | ||
| Surface Min | Typical Surface Quality | A | Maximum defect depth: 0 to 0.5% of d or t |
| B | Maximum defect depth: 1.0% of d or t | ||
| C | Defect depth:less that 3.5% of d or t | ||
| Min Size | Sizes commonly available for wire or strip | Special sizes may be available at additional cost. | |
| Max Size | |||
| Max Temp | Maximum service temperature | May vary due to operating stress | |
Information is for Reference Purposes Only. Factors can vary with cold work, stress relieving and operational stress. Variations may be minor but should be considered for critical properties.
*Mobile: To view complete table - scroll horizontally
Brite Basic CA260 Wire Springs |
Brite Basic CA260 Flat Springs
|
Brite Basic CA260 Wire Products
|
|
Brite Basic CA260 Compression Springs
Brite Basic CA260 Extension Springs
Brite Basic CA260 Torsion Springs
Brite Basic CA260 Double Torsion Springs
Brite Basic CA260 Conical Springs
Brite Basic CA260 Tapered Springs
Brite Basic CA260 Barrel Springs
Brite Basic CA260 Hourglass Springs
Brite Basic CA260 Die Springs
Brite Basic CA260 Garter Springs
Brite Basic CA260 Magazine Springs
Brite Basic CA260 Miniature Springs
Brite Basic CA260 Heavy Duty Springs
Brite Basic CA260 Hot Wound Springs
Brite Basic CA260 Cable Springs
Brite Basic CA260 Wave Springs
Brite Basic CA260 Coil SpringsBrite Basic CA260 Valve Springs
Brite Basic CA260 Micro Springs
Brite Basic CA260 Helical Springs
Brite Basic CA260 Mechanical Springs
|
Brite Basic CA260 Spring Clips
Brite Basic CA260 Constant Force Springs
Brite Basic CA260 Spiral Springs
Brite Basic CA260 Power Springs
Brite Basic CA260 Wave Washers
Brite Basic CA260 Curved Washers
Brite Basic CA260 Belleville Washers
Brite Basic CA260 Retaining Rings
Brite Basic CA260 Variable Force Springs
Brite Basic CA260 Constant Torque Springs
Brite Basic CA260 Volute Springs
Brite Basic CA260 Bow Springs
Brite Basic CA260 Electrical Contacts
Brite Basic CA260 Battery Contacts
Brite Basic CA260 Fourslides Stampings
Brite Basic CA260 Clock Springs
|
Brite Basic CA260 Wire Forms
Brite Basic CA260 Wire Bending
Brite Basic CA260 Wire Rings
Brite Basic CA260 Wire Forming
Brite Basic CA260 Wire Products
Brite Basic CA260 S-Hooks |
Carbon Steel Wire Brite Basic CA260