Inconel X-750
Nickel Base Wire
Spring Works Utah specializes in the custom manufacture of wire springs, flat springs, and wire products using Inconel X-750 Carbon Steel Strip material. Our extensive inventory and design experience makes us a resource for customer requests as well as a preferred supplier to spring manufacturers worldwide. We know choosing the right material can be challenging and many times the most important aspect of your design. We will assist you in picking the best material for your specific application, all at the right price.
Choosing the Right Springs Manufacturer Matters!
Put Us To Work For You!
*Mobile: To view complete table - scroll horizontally
Technical Specifications of Carbon Steel Strip Inconel X-750 |
||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Specifications | Key Features | Chemical Composition | ||||||||||||||||||||||||
| AMS 5688 ASTM A313 ASTM A580 BS 970 BS 2056 |
Good mechanical properties and corrosion resistance. |
|
||||||||||||||||||||||||
*Mobile: To view complete table - scroll horizontally
Technical Specifications of Carbon Steel Strip Inconel X-750 |
||
| Maximum Temperature | 500°F | 260°C |
| Melting Point | 2590°F | 1420°C |
| Minimum Size | 0.005 in | 0.130 mm |
| Maximum Size | 0.375 in | 9.500 mm |
| Modulus of Elasticity | 27195 ksi | 187.5 kN/mm² |
| Modulus of Rigidity | 10196 ksi | 70.3 kN/mm² |
| Density | 0.286 lb/in3 | 7.920 g/cm3 |
| Relative Strength | Medium | |
| Fatigue Applications | Good | |
| Rockwell Hardness | C35-45 | |
| Conductivity | 2 | |
| Typical Surface | B | |
*Mobile: To view complete table - scroll horizontally
Technical Specifications of Carbon Steel Strip Inconel X-750 |
|||
| E Mpa | Young's Modulus | These factors can vary with cold work, heat treating and operational stress. | |
| E psi | |||
| G Mpa | Modulus of Rigidity | ||
| G psi | |||
| Conductivity | % IACS | ||
| Surface Min | Typical Surface Quality | A | Maximum defect depth: 0 to 0.5% of d or t |
| B | Maximum defect depth: 1.0% of d or t | ||
| C | Defect depth:less that 3.5% of d or t | ||
| Min Size | Sizes commonly available for wire or strip | Special sizes may be available at additional cost. | |
| Max Size | |||
| Max Temp | Maximum service temperature | May vary due to operating stress | |
Information is for Reference Purposes Only. Factors can vary with cold work, stress relieving and operational stress. Variations may be minor but should be considered for critical properties.
*Mobile: To view complete table - scroll horizontally
Inconel X-750 Wire Springs |
Inconel X-750 Flat Springs
|
Inconel X-750 Wire Products
|
|
Inconel X-750 Compression Springs
Inconel X-750 Extension Springs
Inconel X-750 Torsion Springs
Inconel X-750 Double Torsion Springs
Inconel X-750 Conical Springs
Inconel X-750 Tapered Springs
Inconel X-750 Barrel Springs
Inconel X-750 Hourglass Springs
Inconel X-750 Die Springs
Inconel X-750 Garter Springs
Inconel X-750 Magazine Springs
Inconel X-750 Miniature Springs
Inconel X-750 Heavy Duty Springs
Inconel X-750 Hot Wound Springs
Inconel X-750 Cable Springs
Inconel X-750 Wave Springs
Inconel X-750 Coil SpringsInconel X-750 Valve Springs
Inconel X-750 Micro Springs
Inconel X-750 Helical Springs
Inconel X-750 Mechanical Springs
|
Inconel X-750 Spring Clips
Inconel X-750 Constant Force Springs
Inconel X-750 Spiral Springs
Inconel X-750 Power Springs
Inconel X-750 Wave Washers
Inconel X-750 Curved Washers
Inconel X-750 Belleville Washers
Inconel X-750 Retaining Rings
Inconel X-750 Variable Force Springs
Inconel X-750 Constant Torque Springs
Inconel X-750 Volute Springs
Inconel X-750 Bow Springs
Inconel X-750 Electrical Contacts
Inconel X-750 Battery Contacts
Inconel X-750 Fourslides Stampings
Inconel X-750 Clock Springs
|
Inconel X-750 Wire Forms
Inconel X-750 Wire Bending
Inconel X-750 Wire Rings
Inconel X-750 Wire Forming
Inconel X-750 Wire Products
Inconel X-750 S-Hooks |
Carbon Steel Strip Inconel X-750