Valve Quality
Carbon Steel Wire
Spring Works Utah specializes in the custom manufacture of wire springs, flat springs, and wire products using Valve Quality Carbon Steel Wire material. Our extensive inventory and design experience makes us a resource for customer requests as well as a preferred supplier to spring manufacturers worldwide. We know choosing the right material can be challenging and many times the most important aspect of your design. We will assist you in picking the best material for your specific application, all at the right price.
Choosing the Right Springs Manufacturer Matters!
Put Us To Work For You!
*Mobile: To view complete table - scroll horizontally
Technical Specifications of Carbon Steel Wire Valve Quality |
||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Specifications | Key Features | Chemical Composition | ||||||||||||||||||||||||
| AMS 5688 ASTM A313 ASTM A580 BS 970 BS 2056 |
Good mechanical properties and corrosion resistance. |
|
||||||||||||||||||||||||
*Mobile: To view complete table - scroll horizontally
Technical Specifications of Carbon Steel Wire Valve Quality |
||
| Maximum Temperature | 500°F | 260°C |
| Melting Point | 2590°F | 1420°C |
| Minimum Size | 0.005 in | 0.130 mm |
| Maximum Size | 0.375 in | 9.500 mm |
| Modulus of Elasticity | 27195 ksi | 187.5 kN/mm² |
| Modulus of Rigidity | 10196 ksi | 70.3 kN/mm² |
| Density | 0.286 lb/in3 | 7.920 g/cm3 |
| Relative Strength | Medium | |
| Fatigue Applications | Good | |
| Rockwell Hardness | C35-45 | |
| Conductivity | 2 | |
| Typical Surface | B | |
*Mobile: To view complete table - scroll horizontally
Technical Specifications of Carbon Steel Wire Valve Quality |
|||
| E Mpa | Young's Modulus | These factors can vary with cold work, heat treating and operational stress. | |
| E psi | |||
| G Mpa | Modulus of Rigidity | ||
| G psi | |||
| Conductivity | % IACS | ||
| Surface Min | Typical Surface Quality | A | Maximum defect depth: 0 to 0.5% of d or t |
| B | Maximum defect depth: 1.0% of d or t | ||
| C | Defect depth:less that 3.5% of d or t | ||
| Min Size | Sizes commonly available for wire or strip | Special sizes may be available at additional cost. | |
| Max Size | |||
| Max Temp | Maximum service temperature | May vary due to operating stress | |
Information is for Reference Purposes Only. Factors can vary with cold work, stress relieving and operational stress. Variations may be minor but should be considered for critical properties.
*Mobile: To view complete table - scroll horizontally
Valve Quality Wire Springs |
Valve Quality Flat Springs
|
Valve Quality Wire Products
|
|
Valve Quality Compression Springs
Valve Quality Extension Springs
Valve Quality Torsion Springs
Valve Quality Double Torsion Springs
Valve Quality Conical Springs
Valve Quality Tapered Springs
Valve Quality Barrel Springs
Valve Quality Hourglass Springs
Valve Quality Die Springs
Valve Quality Garter Springs
Valve Quality Magazine Springs
Valve Quality Miniature Springs
Valve Quality Heavy Duty Springs
Valve Quality Hot Wound Springs
Valve Quality Cable Springs
Valve Quality Wave Springs
Valve Quality Coil SpringsValve Quality Valve Springs
Valve Quality Micro Springs
Valve Quality Helical Springs
Valve Quality Mechanical Springs
|
Valve Quality Spring Clips
Valve Quality Constant Force Springs
Valve Quality Spiral Springs
Valve Quality Power Springs
Valve Quality Wave Washers
Valve Quality Curved Washers
Valve Quality Belleville Washers
Valve Quality Retaining Rings
Valve Quality Variable Force Springs
Valve Quality Constant Torque Springs
Valve Quality Volute Springs
Valve Quality Bow Springs
Valve Quality Electrical Contacts
Valve Quality Battery Contacts
Valve Quality Fourslides Stampings
Valve Quality Clock Springs
|
Valve Quality Wire Forms
Valve Quality Wire Bending
Valve Quality Wire Rings
Valve Quality Wire Forming
Valve Quality Wire Products
Valve Quality S-Hooks |
Carbon Steel Wire Valve Quality