Chrome Silicon
Alloy Steel Wire
Spring Works Utah specializes in the custom manufacture of wire springs, flat springs, and wire products using Chrome Silicon Alloy Steel Wire material. Our extensive inventory and design experience makes us a resource for customer requests as well as a preferred supplier to spring manufacturers worldwide. We know choosing the right material can be challenging and many times the most important aspect of your design. We will assist you in picking the best material for your specific application, all at the right price.
Choosing the Right Springs Manufacturer Matters!
Put Us To Work For You!
*Mobile: To view complete table - scroll horizontally
Technical Specifications of Alloy Steel Wire Chrome Silicon |
||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Specifications | Key Features | Chemical Composition | ||||||||||||||||||||||||
| AMS 5688 ASTM A313 ASTM A580 BS 970 BS 2056 |
Good mechanical properties and corrosion resistance. |
|
||||||||||||||||||||||||
*Mobile: To view complete table - scroll horizontally
Technical Specifications of Alloy Steel Wire Chrome Silicon |
||
| Maximum Temperature | 500°F | 260°C |
| Melting Point | 2590°F | 1420°C |
| Minimum Size | 0.005 in | 0.130 mm |
| Maximum Size | 0.375 in | 9.500 mm |
| Modulus of Elasticity | 27195 ksi | 187.5 kN/mm² |
| Modulus of Rigidity | 10196 ksi | 70.3 kN/mm² |
| Density | 0.286 lb/in3 | 7.920 g/cm3 |
| Relative Strength | Medium | |
| Fatigue Applications | Good | |
| Rockwell Hardness | C35-45 | |
| Conductivity | 2 | |
| Typical Surface | B | |
*Mobile: To view complete table - scroll horizontally
Technical Specifications of Alloy Steel Wire Chrome Silicon |
|||
| E Mpa | Young's Modulus | These factors can vary with cold work, heat treating and operational stress. | |
| E psi | |||
| G Mpa | Modulus of Rigidity | ||
| G psi | |||
| Conductivity | % IACS | ||
| Surface Min | Typical Surface Quality | A | Maximum defect depth: 0 to 0.5% of d or t |
| B | Maximum defect depth: 1.0% of d or t | ||
| C | Defect depth:less that 3.5% of d or t | ||
| Min Size | Sizes commonly available for wire or strip | Special sizes may be available at additional cost. | |
| Max Size | |||
| Max Temp | Maximum service temperature | May vary due to operating stress | |
Information is for Reference Purposes Only. Factors can vary with cold work, stress relieving and operational stress. Variations may be minor but should be considered for critical properties.
*Mobile: To view complete table - scroll horizontally
Chrome Silicon Wire Springs |
Chrome Silicon Flat Springs
|
Chrome Silicon Wire Products
|
|
Chrome Silicon Compression Springs
Chrome Silicon Extension Springs
Chrome Silicon Torsion Springs
Chrome Silicon Double Torsion Springs
Chrome Silicon Conical Springs
Chrome Silicon Tapered Springs
Chrome Silicon Barrel Springs
Chrome Silicon Hourglass Springs
Chrome Silicon Die Springs
Chrome Silicon Garter Springs
Chrome Silicon Magazine Springs
Chrome Silicon Miniature Springs
Chrome Silicon Heavy Duty Springs
Chrome Silicon Hot Wound Springs
Chrome Silicon Cable Springs
Chrome Silicon Wave Springs
Chrome Silicon Coil SpringsChrome Silicon Valve Springs
Chrome Silicon Micro Springs
Chrome Silicon Helical Springs
Chrome Silicon Mechanical Springs
|
Chrome Silicon Spring Clips
Chrome Silicon Constant Force Springs
Chrome Silicon Spiral Springs
Chrome Silicon Power Springs
Chrome Silicon Wave Washers
Chrome Silicon Curved Washers
Chrome Silicon Belleville Washers
Chrome Silicon Retaining Rings
Chrome Silicon Variable Force Springs
Chrome Silicon Constant Torque Springs
Chrome Silicon Volute Springs
Chrome Silicon Bow Springs
Chrome Silicon Electrical Contacts
Chrome Silicon Battery Contacts
Chrome Silicon Fourslides Stampings
Chrome Silicon Clock Springs
|
Chrome Silicon Wire Forms
Chrome Silicon Wire Bending
Chrome Silicon Wire Rings
Chrome Silicon Wire Forming
Chrome Silicon Wire Products
Chrome Silicon S-Hooks |
Alloy Steel Wire Chrome Silicon